Skip to main content

Google Street View Basic Workflow

To upload a tour to Google Street View from Pano2VR pro, just open the Google Street View Panel and connect your Google account. You’ll then have access to all your images and tours. Here’s the basic workflow for uploading a small tour to Google Street View.

  1. Add an image or if using Pro, multiple images/tour to your project.

  2. Level the images, if needed.
    ✭ If the image has leveling data, Pano2VR will use this to level the image.

  3. Check location accuracy.
    Sometimes, the recorded GPS might be a little off. Use the Tour Map to fix locations by just dragging the pins in the map.

    ✭ Tip: Use the keyboard shortcut, Command-] to quickly move to the next panorama.

  4. Check that North is set.
    In User Data, if North is set to 0º, most likely North has not been set. Setting North can be done a few ways:

    • Hold down the N key while spinning the panorama in the Viewer. You can use the Tour Map to help with the orientation.

    • Use the Pick Landmark method.

    ✭ Copy North to all nodes instead of fixing it in all nodes. In User Data, find the North setting that is correct for a single node. Click the copy button to copy North to all nodes.

  5. Add Patches.

    • Fix the Nadir.

    • Add a Blurring patch to blur out faces and license plates.

    • Add a Blur Cover patch for quick hiding of the tripod.

    ✭ To add the same patch across all tour nodes, add a patch in the Master Node.

  6. Connect the panoramas.
    Just like setting North, you have a few ways to choose from to connect the nodes:

    • If you have just a few panoramas, you can use Auto Place by dragging a panorama from the Tour Browser to the top right corner of the Viewer. Drop on either Auto Place or Auto Place Both Ways which connects the images to one another.

    • In the Tour Map, use the Automatic Linking option, Closest Node, to quickly connect all the nodes.

    • Or activate the Linking Mode in the Tour Map to manually link the nodes:

    Activate Link Mode

    When you’re done connecting all the nodes, you can hold down the Alt [win] or Option [macos] key and click the hotspots in the viewer to move through the tour.

    If you need to remove a connection (while in Link Mode), press the Alt or Option key and click the target pin of a connection in the Tour Map to remove the linking.

    ✭ Learn more: Adding Levels

  7. Open the Google Street View panel.

  8. Connect your Google account using the Grant Access button.

    GSV Grant Access

  9. Add a Place ID to the nodes.

    • Click the Add Place button and then choose or type the place.

    Add Place

    • Add a place via Google Maps using the Pick Place from Google Maps button. When you click this, the Tour Map will open. Find a point of interest (POI) on the map (indicated by the pointing finger hand curser) and click it. The place will then be applied to that node.

    ✭ Use the Copy button to copy the same Place ID to all nodes.

  10. Upload the project using the Upload Project button.

    Upload

Viewing the Tour

Once the project is uploaded, you’ll see the images, but it may take a while for the connections to be made. In the meantime, you can check your images using the Street View Browser.

To view the panorama or tour in Google Street View, double-click the panorama in the Street View Browser. For a tour, open the tour to expand the images and double-click on one of the tour nodes.


See also

2018-11-20 14:48:10