Sorry about my poor English!
I am the pano2vr beginner,I have some questions,
1.I use insta360 one x interval shooting,import photos into pano2vr ,
Most of images have to set North,can I set orientations at once?!
2.Is it possible set pinning images in the Pano2vr upload to GSV!?
THX....
For help! Ser north & pinning images in GSV
- Hopki
- Gnome
- Posts: 13066
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi,
If all the images are taken with the camera facing the same direction then yes, but if not you will need to set the heading manually using the “N” key. But this is quite quick.
You can not use pinned images, however you can add a patch.
Regards,
Hopki
If all the images are taken with the camera facing the same direction then yes, but if not you will need to set the heading manually using the “N” key. But this is quite quick.
You can not use pinned images, however you can add a patch.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Hi,
Once you have the correct orientation you can click on the 'Copy north to all nodes' button. This will copy the current settings to all nodes. If you only want it copied to specific nodes simply select the nodes, in the 'Tour Browser', that you want to update and when you click on the copy button you will get the option, 'Selected Nodes' or 'All Nodes'.
cheers,
Tony
Yes. In the 'User Data' window you can set the North: degree by typing in a number and select 'Set' alternatively you can hold down the 'N' key and moving the North symbol in the 'Viewer' window or use the 'Pick Landmark' method https://ggnome.com/doc/pano2vr/6/panel- ... #set-north1. Most of images have to set North,can I set orientations at once?!
Once you have the correct orientation you can click on the 'Copy north to all nodes' button. This will copy the current settings to all nodes. If you only want it copied to specific nodes simply select the nodes, in the 'Tour Browser', that you want to update and when you click on the copy button you will get the option, 'Selected Nodes' or 'All Nodes'.
No, GSV only accepts flat images.2. Is it possible set pinning images in the Pano2vr upload to GSV!?
cheers,
Tony
Tony Redhead | Panoramic Photographer | mobile: +61438501002 | website: https://tonyredhead.com - https://redsquare.com | Pano2VR Tutorials: https://tonyredhead.com/pano2vr | instagram: https://www.instagram.com/tonyredhead/
There is a lot of helpful info in these posts as I have learned that I am not alone when trying to Pano2vr to GSV.
I also have other questions,
I made 2 floors,and mapping on the google,importing photos to get indoor gps,set North,make each nodes connecting,tags ground floor,floor 1,then upload to GSV...
But after upload 24hrs,
1.I can't see the elevator in the GSV,
2.can't show all navigator arrow? Some area can't connect next node!
What's wrong with my procedure ...
should I turnoff the GSV autoconnect function !
I also have other questions,
I made 2 floors,and mapping on the google,importing photos to get indoor gps,set North,make each nodes connecting,tags ground floor,floor 1,then upload to GSV...
But after upload 24hrs,
1.I can't see the elevator in the GSV,
2.can't show all navigator arrow? Some area can't connect next node!
What's wrong with my procedure ...
should I turnoff the GSV autoconnect function !
- Hopki
- Gnome
- Posts: 13066
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Yes, this will cause problems, but be aware Google requires many hours before you will start to see arrows.
In one case someone reported over three days!
But not using Pano2VR.
Regards,
Hopki
In one case someone reported over three days!
But not using Pano2VR.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/