Is it possible to start a timer to start auto-rotate (x) seconds after a deactivation action at the end of a video? I have a video introduction/lead in to my tour of panos, but don't want auto-rotate to start for an number of seconds after the video is done and the tour is revealed.
Thanks,
Kevin
Start timer upon deactivation of a video
- Hopki
- Gnome
- Posts: 13032
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi,
Yes in the video element have a deactivate action to set value to a timer.
Regards,
Hopki
Yes in the video element have a deactivate action to set value to a timer.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Sure you can. You add an action to the video. Source: Deactivate -> set value: x (these are the seconds), target timer.
For the timer you also make a deactivate action -> start autroate
You should set the default timer value to the maximum (600) so that it will not start on its own, before the video ends. Please have a look at the attached skin.
For the timer you also make a deactivate action -> start autroate
You should set the default timer value to the maximum (600) so that it will not start on its own, before the video ends. Please have a look at the attached skin.
- Attachments
-
- video_end_test.ggsk
- (962 Bytes) Downloaded 153 times
MfG, Thomas