Garden Gnome Software

Hi all,
i have a strange problem with floorplans...

I add the first floorplan, it works perfect.
Then i add a second floorplan. Both floorplans show the picture from plan 2, and the pins are from plan 2 in both cases too.

I have to delete both floorplans, go back to p2vr 6.1.15, and add both floorplans. Go again to 7.0.5, re-edit everything that has been new in 7.0.5, rebuild the tour, and the both floorplans work as they should.
Plan 1 shows picture one and the pind from plan 1,
plan 2 shows picture 2 and the pins from plan 2.

What is going wrong?

The tour can be seen here...
http://360.haifischbar.de/panoramen/bei ... it_debug=1
the floorplans can be shown lower left corner.

..it is still on work...

greetings from germany
Chris

tadaaaa ... problem solved.

on the map properties there is a field "Grundriss automatisch wechseln". This must be unchecked.

found this by try and error, here ... https://ggnome.com/doc/pano2vr/create-s ... ments/map/ ... well hidden property.

greetings from germany
Chris