Pano2vr change panorama after autorotation

Q&A about the latest versions
Post Reply
EMMA
Posts: 25
Joined: Mon Jul 06, 2015 1:27 pm

Hi,

How is't possible , when we don't touch mouse, that when finish 360° autorotation, change panorama automatically ?
There's a tutorial ?

Thanks
Emma
User avatar
Hopki
Gnome
Posts: 13004
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi Emma,
You can use auto rotate and have a fixed time to change nodes or my preferred way is to use animation.
I add a clip/first pano, rotate 360. then add second clip and so on.
I like Animation as its looks much nicer.

As an example add a clip, set the clip length to 30 seconds then move the play dead to the end. Add keyframes, then edit the pan keyframe by right button clicking on it.
Whatever the starting pan angle is, just -360. then enter that value.
What you should have is a perfect 360 with ease in and out.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
EMMA
Posts: 25
Joined: Mon Jul 06, 2015 1:27 pm

Hi Hopki,

After your post, I try to use Autorotation but I think to understand that I can to put same time and rotation for all panos.

So, if yes, I'd like to use Animation. I understand how to work timelines with keyframes etc etc ...., but How Can I save it ?

After I've prepared keyframes , I flag animation button , but if I render output in html5 , my panos is " black " .

U know why ?

EMMA
User avatar
Hopki
Gnome
Posts: 13004
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

HI EMMA,
For the black output, this may just be local file restriction from the browser.
This will happen if you open the HTML page directly from the output folder.
To my knowledge Firefox and MS Edge are the only browser that can.
This is why Pano2VR has a built in web server.

For others looking at this post I'm just going to go through how to make each clip.

The steps to use animation are:
First get the required pan angle which is done by taking the starting pan value and -360 or +360 depending which direction you want to rotate.
Example if the starting pan is 280º then minus 360 which will equal to -80.

• Open the animation editor and ad the first clip
• Change duration to 30 seconds or however long you want to rotate the full 360
• Use the First Forward button to move the scrubber to the end of the time line and click add key frames button
• Right button click on the Pan keyframe you just created and add the value -80

This takes seconds to do and needs to be repeated for each node.
As these are Bezier Keyframes this is excellent when changing nodes because of the ease in and ease out.

Now you have the animation you can use it as an auto rotate for a HTML5 output or you create an MP4 with the Animation output.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
EMMA
Posts: 25
Joined: Mon Jul 06, 2015 1:27 pm

Hi Hopki,

I follow your steps.

I select the parameters that u can see in 2 files ( attachments )

My bad result u can see here https://www.luke04.com/test/

Do u know where's mistake ?
Last edited by EMMA on Wed Jan 24, 2018 5:47 pm, edited 1 time in total.
User avatar
360Texas
Moderator
Posts: 3684
Joined: Sat Sep 09, 2006 6:06 pm
Location: Fort Worth, Texas USA
Contact:

Using a PC Chrome and developer tools "Console" I get results as follows:

removed as console results did not apply.
(deleted)
Dave
Pano2VR Forum Global Moderator
Image
Visit 360texas.com
EMMA
Posts: 25
Joined: Mon Jul 06, 2015 1:27 pm

Sorry I don't understand.

I don't know where's my error in Pano2vr.

Also I don't understand error in console of Chrome.

I've this without error:



I think that is not correct my output from Pano2vr.

Someone have an example project, so I can try ?

Always thanks
Last edited by EMMA on Wed Jan 24, 2018 5:47 pm, edited 1 time in total.
User avatar
360Texas
Moderator
Posts: 3684
Joined: Sat Sep 09, 2006 6:06 pm
Location: Fort Worth, Texas USA
Contact:

I see your console box under panorama shows no errors.

Thinking about what I found... it might be because our desktop 27" screen monitor is a touch screen.

My results might not apply to your desktop results.

Even with my console err showing... I went to your panorama and did in fact did touch hotspots and they worked just like a mouse click as expected.

I am now deleting my comment below because it does not apply to your situation.

Sorry for the confusion factor.
Dave
Pano2VR Forum Global Moderator
Image
Visit 360texas.com
User avatar
Hopki
Gnome
Posts: 13004
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

HI,
Iv made a quick video showing how to do this.
Link to Video

The project has two nodes, with an HTML5 output using one of the packages skins.
Let me know when your done so I can remove the video as its quite large.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
EMMA
Posts: 25
Joined: Mon Jul 06, 2015 1:27 pm

Thanks Hopki,

Now I try to follow your link to see vhere is my error.

When I'll finish, I'll tell u.

I hope to resolve my problem.
EMMA
Posts: 25
Joined: Mon Jul 06, 2015 1:27 pm

Hi,
I found the problem !!!
There's only one problem ..... Linux.
I use Ubuntu and the animation doesn't work. After I've tried with my Ibook and ... works.
So, I think that there's a bug with Linux. I didn't notice it because it don't give me any errors.
I hope that GG software resolve asap.

p.s.: Hopki, U can delete your .mp4 , thanks
Post Reply