Node ID and Direct node access

Q&A about the latest versions
Post Reply
SRibas
Posts: 64
Joined: Fri Oct 16, 2015 5:28 pm
Location: Porto
Contact:

How to define each node, in order to access it via .../index.html#node5.....?????
I have create normal text ID for each node, and.......nothing......it shows the pano tour from the first defined pano.

I find great you are creating new features, and improve Pano2VR.......but without useful information how to use this new features correctly......it´s a waste
....perhaps great for rocket scientists. :?
User avatar
Hopki
Gnome
Posts: 13005
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi SRibas,
In version 5.0 you use the node ID.
To see this make sure Show internal node ID is selected in the settings, this is found under the Advanced tab.
Once selected just hover your mouse over the image in the tour browser and a tool tip will show with the nodes ID.
1.jpg
1.jpg (52.81 KiB) Viewed 9141 times
Or with version 5.1 beta 2 you can set a custom name which you set under user data and Custom Node ID.

Now under the HTML5 output and the HTML tad select the edit template button and select Direct Node Access.
When using it you add the node ID at the end of the URL.
With version 5.1 you would add the name, example www.yoursute.com/tour/index.html#kitchen
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
SRibas
Posts: 64
Joined: Fri Oct 16, 2015 5:28 pm
Location: Porto
Contact:

It is working!! This will help me a lot on doing my new Tours. Thanks!
regards :D
SRibas
Posts: 64
Joined: Fri Oct 16, 2015 5:28 pm
Location: Porto
Contact:

It works when dealing directly with the pano tour URL, but inside RapidWeaver offsite url (the standard method to display pano tours inside RapidWeaver) when using URL link http://braganca.360portugal.com/Concelh ... imioso_60m
it go to the defined start panorama for /VimiosoMatrizVR.html, not this one.
It is working with the local server, not with my actual website server
User avatar
360Texas
Moderator
Posts: 3684
Joined: Sat Sep 09, 2006 6:06 pm
Location: Fort Worth, Texas USA
Contact:

Not sure what Rapidweaver is but when right mouse clicking on your Church panorama it reads Created with Pano2vr.
Dave
Pano2VR Forum Global Moderator
Image
Visit 360texas.com
User avatar
Hopki
Gnome
Posts: 13005
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi SRibas,
I see your URL has the node access #Vimioso_60m
The problem is I have no idea which pano it is.
In your project can you list the DNA you have used for each location.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
SRibas
Posts: 64
Joined: Fri Oct 16, 2015 5:28 pm
Location: Porto
Contact:

The panotour is only 5 nodes : 3 inside this church (ID: Igreja_Nave , Igreja_Capela , Igreja_CapelaMor)
and 2 exterior aerial panos (ID: Vimioso_40m , Vimioso_60m)
The starting pano is Igreja_Nave
For the interior church tour It´s ok with this setting
For the exterior village I would like to use the same tour but accessing first the aerial node Vimioso_60m using the direct node ID.
I would like to use this scheme for other bigger tours, without the need to divide the multiple node tours in small ones.

regards
User avatar
Hrvoje
Posts: 171
Joined: Sat Feb 28, 2009 7:34 pm
Location: Zagreb, Croatia
Contact:

Hello

It seems that I have problems with Custom Node ID as well - ID doesn't work.
I have 9 panoramas in the tour. And I've set Their custom Node IDs: pano1, pano2, ..., pano9
Sorted by appearance in Tour Browser.

But when I try to access specific node like this: someurl/index.html#pano4
- it always opens 1st pano.
It works with default node ID (index.html#node31), but it doesn't work with custom IDs.
Although access by default node ID works, it's not convenient, because node IDs are not logically ordered.
In HTML file settings I've checked Direct node access.
Pano2VR 5.1 beta2 pro 64bit Revision: 15706/5.7.0

I attached screenshot to show firebug error as well

Any suggestions?

Thanks
Regards
Screenshot_1.jpg
Screenshot_1.jpg (122.34 KiB) Viewed 9048 times
User avatar
Hrvoje
Posts: 171
Joined: Sat Feb 28, 2009 7:34 pm
Location: Zagreb, Croatia
Contact:

Le bump

Installed latest beta 2 version and direct linking to custom node IDs (still) doesn't work:

http://www.krk360.com/dreamvg/Prenociste/index.html
9 panos there. Custom node id are: pano1, pano2, ... , and pano9
Try this, it doesn't work:
http://www.krk360.com/dreamvg/Prenocist ... html#pano5
This works:
http://www.krk360.com/dreamvg/Prenocist ... html#node5

But for this one I manually renamed node names in pano2vr file, which is time consuming.
I tend to reuse pano2vr files for new projects to avoid spending time to initial setup
that's why node numbers are rising.

Made with latest P2VR: Version: 5.2 beta pro 64bit
Revision: 15832/5.7.1
Build date: Mar 14 2017, 10:50:06

Any hints?

Thanks,
Regards
User avatar
Hopki
Gnome
Posts: 13005
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi Guys,
Ill check it our and if I can reproduce I will bug track, if not ill be in touch.
Regards,
Hopki.

##### Bug Tracked ######
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
CShcurmann
Posts: 1
Joined: Tue Mar 14, 2017 6:19 pm

911 - Has this NodeID been fixed. I am working on a large tour and the client demands custome NodeID connections
User avatar
Hrvoje
Posts: 171
Joined: Sat Feb 28, 2009 7:34 pm
Location: Zagreb, Croatia
Contact:

Hi
Yep it works, I'm using it.
Regards
Post Reply