Hi have used for years google street view editor i'm switched to Pano2vr but only problem
In html 5 my first tour work perfectly
http://www.gebox.it/CONTAINER/Marpione/index.html
If i try to publish google street view many problem , error
And i can see the tour on google maps
Why i can't see all the pin on the map in Pano2vr ?
Pano2vr asked me a gpps position but i know only the Business latitude i do't have any idea about the other panorama
I have used 8 stitched pano from ptgui , it's my first tour
Are 8 pano but Pano2vr published only the first pano
I have put the sea latitude maybe this is the problem
How to disable the latitude ?
So i 'm not able to use this program
Lot of problem
- Attachments
-
- Screenshot 2017-05-10 22.35.30.png (1.91 MiB) Viewed 3184 times
-
- Screenshot 2017-05-10 22.24.39.png (1.61 MiB) Viewed 3184 times
you will have to manually position all panos on the map.
Select a pano and right-click (on the mac) into the map to position the marker for this pano. Now, while this pano is still selected, click on all panos you like to jump to. A little dialog appears and here you activate the link between the two panos.
I had to figure this out too - there is no auto placement like you saw it in the Google editor.
Select a pano and right-click (on the mac) into the map to position the marker for this pano. Now, while this pano is still selected, click on all panos you like to jump to. A little dialog appears and here you activate the link between the two panos.
I had to figure this out too - there is no auto placement like you saw it in the Google editor.
- Hopki
- Gnome
- Posts: 13022
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
HI fpdesign,
Looking at your screen shot you have quite a few issues here.
The fact you have the satellite icon in the thumbnails in the tour browser shows you have location data but it looks like you have not copied the "Place" to all your nodes.
Also be aware the hotspots in Google will use the location data not where you place the point hotpot in the point hotspot viewer mode.
Iv had a few question this now but if you are making a multi node tour of a location make sure each node is in line of sight of the other.
This will avoid hotspot being placed on walls etc.
If you correct these thing sand upload again you will need to wait up to a day or two before you see the changes take effect. Also using the phone app make sure your images are not rejected by Google. If they are this may also take a few days for them to be approved.
Regards,
Hopki
Looking at your screen shot you have quite a few issues here.
The fact you have the satellite icon in the thumbnails in the tour browser shows you have location data but it looks like you have not copied the "Place" to all your nodes.
Also be aware the hotspots in Google will use the location data not where you place the point hotpot in the point hotspot viewer mode.
Iv had a few question this now but if you are making a multi node tour of a location make sure each node is in line of sight of the other.
This will avoid hotspot being placed on walls etc.
If you correct these thing sand upload again you will need to wait up to a day or two before you see the changes take effect. Also using the phone app make sure your images are not rejected by Google. If they are this may also take a few days for them to be approved.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Thanks for the answer the support say me that
1) The Process is open Pano2VR add panos
2) Save the project!
3) Set user data but not user data title
4) Add location data using the tour map if not already geo tagged
5) Link the hotspots
6) Open Street View panel and add place, copy place to all panos if they are in the same place
Upload to Google."
i published but i see the tour here like a PHOTOSPHERE
https://www.google.com/maps/contrib/100 ... m2!3m1!1e1
Not in the business
That is the only issue
https://www.google.it/maps/uv?hl=it&pb= ... kQoioIajAL
why?
Maybe the problem is the Title (Titolo) ?
thanks
1) The Process is open Pano2VR add panos
2) Save the project!
3) Set user data but not user data title
4) Add location data using the tour map if not already geo tagged
5) Link the hotspots
6) Open Street View panel and add place, copy place to all panos if they are in the same place
Upload to Google."
i published but i see the tour here like a PHOTOSPHERE
https://www.google.com/maps/contrib/100 ... m2!3m1!1e1
Not in the business
That is the only issue
https://www.google.it/maps/uv?hl=it&pb= ... kQoioIajAL
why?
Maybe the problem is the Title (Titolo) ?
thanks
- Attachments
-
- Screenshot 2017-05-11 23.01.45.png (471.11 KiB) Viewed 3158 times