Page 1 of 1
Object Model DIY - NN R1 work enviornment
Posted: Thu Nov 25, 2010 5:39 pm
by 360Texas
The NN R1 was photographed in this work enviornment. Feel free to copy the file to your hard drive for later reviewing.
- NNR1atwork550.jpg (235.66 KiB) Viewed 4100 times
Re: Object Model DIY - NN R1 work enviornment
Posted: Thu Nov 25, 2010 5:45 pm
by 360Texas
And here is the result using Object2VR 2b7
USE MOUSE TO ROTATE
- objnnr1.swf
- Use mouse and drag the image
- (885.61 KiB) Downloaded 3938 times
Re: Object Model DIY - NN R1 work enviornment
Posted: Mon Nov 29, 2010 1:37 am
by 360Texas
Above you have seen an object revolving around to see most all sides.
Lets reverse the camera positions. Here is a panorama taken from the center of the scene.
Canon 500d Sigma 8mm fisheye lens. 4 images taken at 90° with a 5° lens tilt up. This tilt up angle converges the top of all 4 images at the top of the sphere projection. If you use your mouse to look up... there is no black hole at the top. Conversely tilting down you see the bottom of 4 images creating a black 4 sided black box. The black box is the background behind the 4 single images.
Think of the projection as pealing back the skin of an orange... the orange is the back ground.. the skin are the merged 4 images.
Oh yes, that is a second panorama head and 8mm lens on the table.
In another forum the full screen buttons were disabled. HOWEVER Full screen buttons function quiet well in this forum.